Lucent STGR-LIPM-A2P-72 0800-0951-002 Comcode 300701380 DSLAM

Lucent DSLAM STGR-LIPM-A2P-72 0800-0951-002 Comcode 300701380
sales@1com.com
Lucent STGR-LIPM-A2P-72 0800-0951-002 (Line Interface and Protection Module) Comcode 300701380. Network Processor based Line Interface Module for ATM over ADSL-DMT. Supports ADSL full-rate, G.Lite and ADSL2+ operation, and line sharing with POTS equipment. Includes full QoS support. 3 TELCO connector on the front panel allowing front access cabling. If used in a Stinger FS, all 72 ports will be operational using the front accessible TELCO connectors. Pre-requisite: Version 9.7 software or later.
Lucent STGR-LIM-A2P-72 0800-0951-001 (Line Interface Module) Comcode 300701372 Network Processor based Line Interface Module for ATM over ADSL-DMT. Supports ADSL full-rate, G.Lite and ADSL2+ operation, and line sharing with POTS equipment. Includes full QoS support. Requires an additional 72 port STGR-LPM2-72.
Lucent STGR-LPM2-72 0800-0998-072 ’72-Port LPM Line Protection Module’ Comcode 300426673 with three 50-pin (RJ-21) telco connectors. Each connector supports 24 ports (2 wires per port). Provides electrical isolation and surge protection.
STGR-LPM2-72 IS NOT NEEDED if STGR-LIPM-A2P-72 0800-0951-002 is used, STGR-LIPM-A2P-72 has on board built-in protection.
Lucent STGR-LIPM-A2P-72 0800-0951-002 comcode 300701380 DSLAM