1COM Site Planning – Design, SAR, TSSR, CW, TI and FLM

1COM Site Planning – Design, SAR, TSSR, CW, TI and FLM
sales@1com.com

TOWER ASSURANCE AND REINFORCEMENT
Increase the carrying capacity of BTS & MW antenna towers with onsite support to prevent downtime connectivity issues, with worldwide support.

1. Increasing the capacity of BTS towers without disassembly is a much quicker solution than tower replacement. No need for disconnection for long periods. Disconnection losses; Tower Traffic hour calculation (erlang unit), easily covers a million TL per month.

2. With on-site support capacity increases. New and leased capacities can be added to the BTS towers

3. When other BTS are cascaded in BTS towers, continuous reinforcement is improved.

1COM turnkey package solution:
– Superstructure analysis
– Infrastructure analysis
– Reinforcement project with analyses
– Reinforcement production
– Site implementation
– Guarantee commitment

Fatigue Analysis:
– Fatigue under repeated loads
– Vibration fatigue
– Welded fatigue
– Multi-axis loading fatigue

Earthquake/Dynamic Shock Resistance Analysis
1COM examines, analyses the behaviors of construction with time-bound boundary conditions or loads. As a result of analysis, time-bound displacement and stress values ​​can be obtained at each point of construction. Reducing the shock accelerations on the construction, the specified shock loading is applied to the construction. For example, with selected shock-absorbing wedges and accelerations on the construction, thrust reaction forces and stresses can be reduced.

Fatigue/Sprain Analysis
A linear analysis method for the determination of the lifetime of construction exposed to periodic loads.
– Fatigue analysis of the entire construction or staff
– The critical sprain
– Forces can be calculated and compared with the given loading condition

MAINTENANCE SERVICES
– MAINTENANCE
– CONSULTANCY
– PREVENTIVE MAINTENANCE

1COM Site Planning – Design, SAR, TSSR, CW, TI and FLM

Rural P2M Wireless

1COM Rural Point-to-Multipoint ‘P2M’ Wireless Broadband Access System

1COM Rural P2M Wireless PDF datasheet: 1COM Rural Wireless Broadband Access System

• A Point-to-Multipoint network structure with a carrier-based terminal station with user-based CPE devices
• Using frequency reuse method to build contiguous cellular networks in wide rural areas
• Enhanced 6-cell base station achieving an effective cell tower’s range from 3Km/1.9 miles to 4Km/2.5 miles
• High gain 5.1 GHz to 6.0 GHz Broadband Directional Antennas
• Single antenna supporting efficient network access up to 120 users simultaneously
• Single base station supporting concurrent network access up to 300 high-bandwidth users simultaneously
• Single base station topping up to 900 Mbps of actual throughput when multiple users access the network, while each user accesses the network per account priority without distance impact
• User bandwidth variation is less than 10% and network access delay time is less than 10 ms in case of multi-users accessing the network

System Package
Base Station
Radio Modem CPE
• 6 element base station
• Central controller supports 3 units
• 5G, Double spatial stream
• 20MHz or 40MHz Channel
• Total system bandwidth: 600Mbps-900Mbps
• Total accessible broadband users: >300
• 5.8G integrated internal antenna
• MIMO2*2

Multiple sites in a large urban area can use cellular structure, reuse frequency to increase system capacity

1COM Base Station Installation Display

1COM Wireless Access 5800 CPE Installation

1COM Rural Point-to-Multipoint Wireless Broadband Access System

FOR MORE INFORMATION:

sales@1com.com